Hot-Swap Hard Disk Drives - Asus 1U Rackmount Barebone Server RS160-E3/PS4 User Manual

2.4

Hot-swap hard disk drives

To install a hot-swap HDD:
1. Release a drive tray by pushing
the spring lock to the right, then
pulling the tray lever outward. The
drive tray ejects slightly after you
pull out the lever.
2. Firmly hold the tray lever and pull
the drive tray out of the bay.
3. Take note of the drive tray holes.
Each side has three holes to fit
different types of hard disk drives.
Use two screws on each side to
secure the hard disk drive.
4. Place a hard disk drive on the tray,
then secure it with four screws.
A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4 A S U S R S 1 6 0 - E 3 / P S 4
1
2
2 - 9 2 - 9 2 - 9 2 - 9 2 - 9