Table of Contents
Advertisement
6.
Select the stripe size from the
menu, then press <Enter>.
For server systems, we recommend that you use a lower array block size.
For multimedia computer systems used mainly for audio and video editing,
we recommend a higher array block size for optimum performance.
7.
When prompted, use the keyboard to assign a name for the RAID 10
set, then press <Enter>.
8.
If you want to make the array
bootable, select Y e s
menu, then press <Enter>.
9.
When prompted to create the RAID
10 set, select <Yes>, then press
<Enter>.
The utility erases all data from the selected hard disk drives. Make sure to
backup all important data before creating a RAID set.
B u i l d C o m p l e t e
B u i l d C o m p l e t e
A B u i l d C o m p l e t e
B u i l d C o m p l e t e
B u i l d C o m p l e t e message
appears to indicate that you have
successfully created the RAID 10
set.
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
Y e s
Y e s
Y e s
Y e s from the
6 - 1 5
6 - 1 5
6 - 1 5
6 - 1 5
6 - 1 5
Advertisement
Table of Contents
