Power Supply Module - Asus 1U Rackmount Barebone Server RS160-E3/PS4 User Manual

2.7.2 2.7.2 2.7.2

Power supply module

Power supply module Power supply module
2.7.2 2.7.2 Power supply module Power supply module
To remove the power supply module:
1. Disconnect all the power supply plugs connected to all the system devices.
Refer to section "2.7 Cable connections" for the locations of pre-
connected cables.
2. Disconnect the main power cable from the rear
of the power supply.
3. Use a Phillips screwdriver (cross)
to remove the four screws that
secure the power supply to the
chassis.
4. Carefully lift the power supply
module from the chassis.
2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8 2 - 1 8
Screw(Rear panel)
Screw
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p