Forwarding - TP-Link TD-W8970 User Manual

2. Enter the following data:
Destination IPv6 Address: The IPv6 address of the network or host that you want to assign

to a static route.
Prefix Length: The prefix length of the destination IPv6 address.

Gateway: Type in the correct IPv6 Gateway address for the IPv6 Static Route.

Interface: Select the Interface from the drop-down list.

Status: Select Enabled or Disabled from the drop-down list.

3. Click Save to save your settings.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the Edit column.
Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete the selected entries.

4.13 Forwarding

There are four submenus under the Forwarding menu: Virtual Server, Port Triggering, DMZ and
UPnP. Click any of them, and you will be able to configure the corresponding function.
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
manuals search engine
Figure 4-63
63