TP-Link TD-W8970 User Manual page 103

Traffic Statistics: Enable or Disable. The default value is disabled. To enable it, click the

Enable. If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60): The default value is 10. Select a value between 5 and 60 seconds

in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Statistics Table:
Operation
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets The total number of packets received and transmitted by the modem router.
Total
Bytes
The total number of bytes received and transmitted by the modem router.
The total number of packets received and transmitted in the last Packets
Packets
Statistic interval seconds.
The total number of bytes received and transmitted in the last Packets
Bytes
Statistic interval seconds.
The number of the ICMP packets transmitted to WAN per second at the
ICMP Tx
specified Packets Statistics interval. It is shown like "current transmitting rate
Current / Max transmitting rate".
The number of UDP packets transmitted to the WAN per second at the
UDP Tx specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
The number of TCP SYN packets transmitted to the WAN per second at the
SYN Tx
specified Packets Statistics interval. It is shown like "current transmitting rate
/ Max transmitting rate".
Reset
Reset the value of he entry to zero.
manuals search engine
Figure 4-109
94