Wireless Mac Filtering - TP-Link TD-W8970 User Manual

Start/End Time: You can select all day-24 hours or you may enter the Start Time and End

Time in the corresponding field.
Add: Click this button to add your selected time to the below table.

Click the Clear Schedule button to clear your settings in the table.
Click Save to complete the settings.

4.8.5 Wireless MAC Filtering

Choose menu "Wireless"  "Wireless MAC Filtering", you can control the wireless access by
configuring the Wireless MAC Filtering function, shown in Figure 4-40.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.

Status: The status of this entry either Enabled or Disabled.

Host: The wireless network that you want the filter rules apply to.

Description: A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-41:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address
00:1D:0F:11:22:33.
Give a simple description for the wireless station in the Description field. For example:
2.
Wireless station A.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
is XX:XX:XX:XX:XX:XX
manuals search engine
Figure 4-40
Figure 4-41
(X is any hexadecimal
48
digit). For example: