TP-Link TD-W8970 User Manual page 14

back panel)

Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to
the Modem Router
you have already made a right connection, please contact your
Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to
configuration. You may need to check this part of information with your ISP and make sure
everything have been input correctly.
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
On
Slow Flash
(WPS)
Quick
Flash
On
(LAN1-4)
Off
On
(USB on the
Flash
Off
for more information about how to make Internet connection correctly. If
Note 1. If your ADSL LED is GREEN ON, please check your Internet
manuals search engine
A wireless device has been successfully added to the network by
WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
A wireless device has failed to be added to the network by WPS
function. Please refer to
information.
There is a device connected to this LAN port.
There is no device connected to this LAN port.
The USB device is identified and ready to use.
The USB device is being identified.
No USB device is plugged into the USB port.
5
4.7.2 WPS Settings for more
2.3 Connecting
ISP to make sure if your