4G Settings - TP-Link TD-W8970 User Manual


Note:
After you finish the Internet configuration, please click Save to make the settings take effect.
4.5.2 3G/4G Settings
If your modem router is in 3G/4G Router Mode, choose menu "Network→3G/4G Settings", you
can configure parameters for 3G/4G function on the screen below. To use the 3G/4G function, you
should first insert your USB modem on the USB port of the modem router. There is already much
3G/4G USB modem information embedded in the modem router. If your USB modem is supported
by the modem router, then "Identify successfully" will display in the USB 3G/4G Modem field.
Select the correct Location and Mobile ISP manually, the USB modem parameters will be set
automatically.
Some 3G/4G USB modem may not be supported by the modem router. For more information,
please refer to Compatibility List on our website: www.tp-link.com. If your 3G/4G USB modem is
incompatible with our modem router, please contact our
Location: Please select the location where you're enjoying the 3G/4G card.

Mobile ISP: Please select the ISP (Internet Service Provider) you apply to for 3G/4G service.

The modem router will show the default Dial Number and APN of that ISP.
Set the Dial Number, APN, Username and Password manually: Check the box and fill the

Dial Number and APN blanks below if your ISP is not listed in the Mobile ISP list or the default
values are not the latest ones.
Dial Number: Enter the Dial Number provided by your ISP.

APN: Enter the APN (Access Point Name) provided by your ISP.

Username/Password: Enter the Username and Password provided by your ISP. These fields

are case-sensitive.
Always on: Connect automatically after the modem router is disconnected. This option is

enabled by default.
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
manuals search engine
technical support.
Figure 4-11
26