Guest Network Status - TP-Link TD-W8970 User Manual

SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK_Guest.
Security: It's strongly recommended to enable WPA/WPA2-Personal.

Authentication Type: Select the Authentication Type from the drop-down list or keep the

default setting Auto.
Encryption: You can select Auto, TKIP or AES.

Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to 64

Hexadecimal characters.
Group Key Update Period: Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network: The guests have access to your Local

Network, but cannot log in the modem router's web-management page.
Allow Guests to access my USB Storage Sharing: The guests can access the specified

files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
Guest Network Isolation: This function can isolate wireless clients on your guest network

from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control: With this function, you can configure the Upstream

/Downstream Bandwidth for guest network.
Click Save to save your settings.
4.9.2
Choose menu "Guest Network""Guest Network Status", you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.
Downloaded from www.Manualslib.com
TD-W8970 300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
4.11.3 Storage

Guest Network Status

manuals search engine
Figure 4-45
Sharing.
52