Writer And Reader Test - MicroBoards Technology Orbit II Reference Manual

5.8 Writer and Reader Test

This final trial run will verify that your new Orbit II has not suffered any shipping damage that affects either
the Writer or the Reader. You will make a back up copy of the Orbit II distribution CD-R, and you will
compare the copy to the master CD-R. You must first change Orbit II's Setup so that Burn CD? is turned
on:
Turn Burn CD? on:
•
Press the No key at the
Compare? DISC-to-DISC
and
•
Press the Yes key at the
Use Buzzer?
prompts.
This sequence will return you to the
Copy the distribution disc:
•
Make sure there is one blank (unrecorded) CD-R in the Input Hopper.
•
Press the Yes key at the
•
When the
digit setting of "0". The underline cursor will move to the "1s" digit. Press the No key once to
set the "1s" digit to "1". Press Yes to accept the "1s" digit setting of "1".
•
When the CD Reader tray opens, place the Orbit II distribution disc in the CD Reader tray and
press Yes.
•
Orbit II will copy the distribution disc to the blank CD-R and place it in the Accept Basket.
Copy DISC-to-DISC?
Copy &
System Setup?
,
Copy Disc-to-Disc?
Quantity? 00
Orbit II Disc Copier Reference Manual – Revision K
,
prompts.
,
52x Write?
Copy Disc-to-Disc?
prompt.
prompt appears, press Yes to accept the "10s"
23
Copy & Compare?
Burn Disc?
Ask Quantity?
, and
prompt with Burn CD? on.
,
,