Loading & Unloading Cd-Rs - MicroBoards Technology Orbit II Reference Manual

Stand alone 52x disc copier

Hide thumbs Also See for Orbit II:

Table of Contents

5.6 Loading & Unloading CD-Rs

Loading CD-Rs

The Input Hopper is located on top of the Orbit II unit. Locate the parts identified in the photograph below

on your Orbit II Disc Copier.

Small diameter

Guide Rods

Because Orbit II has a separate CD Reader, you place only blank discs in the Input Hopper for Copy CD-

to-CD? and Copy & Compare? operations. For Compare CD? operations the discs in the Input Hopper

will have already been recorded.

recommend the use of lint free gloves whenever you handle CD-Rs, because fingerprints can affect

recording, playback, and printability. To avoid touching critical surfaces, handle CD-Rs by their inside

and outside edges.

Master discs are always placed in Orbit II's CD Reader.

Orbit II Disc Copier Reference Manual – Revision K

CD-R Support

Ledge

Singulator Plate

Stepped

Guide Rod

Table of Contents

Need help?

Do you have a question about the Orbit II and is the answer not in the manual?