Table of Contents
Advertisement
When screwing in wood, it is recommended to drill a pilot
hole with a depth equal to the length of the screw. A pilot
hole guides the screw and prevents splintering or
distortion of the wood. For the optimum size of the pilot
hole, refer to the table below.
When screwing in hardwood, also drill a clearance hole
with a depth equal to half the length of the screw. For the
optimum size of the clearance hole, refer to the table below.
Screw size
Pilot hole ø
(softwood)
No. 6 (3.5 mm)
2.0 mm
No. 8 (4 mm)
2.5 mm
No. 10 (5 mm)
3.0 mm
No. 12 (5.5 mm)
3.5 mm
Note: When the impact mechanism engages, a ratcheting sound
is produced. This is normal and does not indicate a problem.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
This tool uses socket driver bits, screwdriver bits and drill bits
with a 1/4" (6.35 mm) hexagonal shank. Piranha Super-lok
accessories are designed for use with this tool.
Warning! Use only dedicated impact accessories with your
tool. Screwdriver bits shorter than 50 mm are not suitable for
use with this tool.
Maintenance
Your Black & Decker tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
6
Pilot hole ø
Clearance
(hardwood)
hole
2.5 mm
3.6 mm
3.0 mm
4.5mm
3.5 mm
5.0 mm
4.0 mm
5.5 mm
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Run the battery down completely, then remove it from the
tool.
NiCd and NiMH batteries are recyclable. Take them to
any authorised repair agent or a local recycling station.
Technical data
Voltage
No-load speed
No-load impact
Max. torque
Bit holder
Max. drilling capacity
Weight
KC600H
V
6
DC
min
-1
2,100
min
-1
5,600
Nm 35
1/4" (6.35 mm hex)
mm 6
kg 0.9
Advertisement
Table of Contents
