Password Setting - Samsung SCP-3120V User Manual

functional description

PASSWORD SETTING

Password Setting
►
Main Menu/Password Setting
The Password feature enables you to confi gure a
password for rebooting the camera and accessing
the OSD and preventing unauthorized modifi cation
of existing camera settings.
•
On/Off :
Enables or disables Password protection.
•
Edit Password :
-
Change the password; enter the current
password and then a new one, consisting of 4
hexadecimal characters (0~F).
* The default password is "0000".
M 
In case you have forgotten the current password, use the controller and perform Preset
255 to access the OSD without the password.

Upon using "Factory Default Set" at "Main Menu > Initialize," the password is reset to
the default, "0000".
86_ functional description
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Password Setting
On/Off OFF
Edit Password
Edit Password
Old Pwd : 0 * * *
New Pwd : * * * *
STATUS
Status
►
Main Menu/Status
Displays the settings and version of the dome
camera.
•
CAM MODEL :
Indicates the model name of the camera.
•
CAM VERSION :
Indicates the software version of the camera.
•
DOME VERSION :
Indicates the version of the camera control board.
•
COAX VERSION :
Indicates the software version of the Coax
communication.
•
CON PROTOCOL :
Indicates the status of the current protocol.
•
DOME ID :
Camera ID
•
CONTROLLER :
Indicates the settings of the current
communications mode.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Status
CAM MODEL = 12N(A1)
CAM VERSION = V1.3
DOME VERSION = V1.00
COAX VERSION = V1.00
CON PROTOCOL = AUTO DET.
DOME ID = 001
CONTROLLER = Simplex
English _ 87
English