Using The Oven For The First Time; Setting The Timer; Setting Cooking Time - Whirlpool AKP 453 User And Maintenance Manual

USING THE ELECTRONIC PROGRAMMER
A
U
T
O
1 2

Using the oven for the first time

Setting the time of day and the tone of the acoustic signal.
Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the time of day, press
buttons - and + at the same time: the two central dots flash. Set the time of day using the buttons + and -. Having selected the
desired value, press the middle button. The display shows "ton 1". To select the desired tone, press button –. Having selected
the preferred tone, press the middle button. To change the time of day, proceed as described above.

Setting the timer

To set the timer, keep the middle button pressed for about 2 seconds: the display shows 0.00 and the bell symbol flashes. Set
the timer using the button + (the maximum programmable value is 23 hours and 59 minutes). The countdown begins after a
few seconds. The display shows the time of day and the bell remains lit, confirming the timer has been set. ToTo display the
countdown status and change it if necessary, press the middle button again for 2 seconds.

Setting cooking time

After selecting the cooking mode and temperature using the knobs, press the middle button for 2 seconds: the display shows
0.00 and the bell symbol flashes. Press the middle button again: on the display
flashes. Set cooking time using the buttons + and - (the maximum programmable value is 10 hours). After a few seconds the
display shows the time of day and AUTO remains lit, confirming the setting. To view the remaining cooking time and change it
if necessary, press the middle button for 2 seconds and then press it again a second time. At the end of the set time, the
symbol switches off, the alarm sounds and AUTO flashes on the display. Press any button to deactivate the alarm. Return the
functions and temperature knob to zero and press the middle button for two seconds to end cooking.
Delaying cooking end time
After selecting cooking time, press the middle button: the display shows
sequence. Press the button + to view the desired cooking end time (cooking can be delayed by a maximum of 23 hours and 59
minutes). After a few seconds the display shows the time of day, the symbol
the setting. To display the cooking end time and change it if necessary, press the middle button for 2 seconds and then press it
again twice. At the end of the countdown, the symbol
1. Button - : to decrease the value shown on the display
B
2. Button
a. Timer
b. Cooking time
c. Cooking end time setting
A
3. Button + : to increase the value shown on the display
A. The symbol
B. The AUTO symbol confirms the setting has been made
3
: for selecting the various settings:
indicates that the timer function is in operation
and 0.00 appear in sequence and AUTO
, cooking end time and AUTO flashing in
switches off and AUTO remains lit, confirming
lights up and the oven proceeds with the selected cooking mode.
GB8