Displaying The Picture - Hitachi CP-X2514WN User Manual

Displaying the picture

1. Activate your signal source. Turn the
signal source on, and make it send the
signal to the projector.
Use the VOLUME + / VOLUME - buttons
2.
to adjust the volume.
To have the projector silent, press the
MUTE button on the remote control.
3. Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to
select an input signal. Press the VIDEO
button for selecting an input signal from
the HDMI, COMPONENT (Y, Cb/Pb,
Cr/Pr), S-VIDEO or VIDEO port, or the
COMPUTER button for selecting an
input signal from the COMPUTER IN1,
COMPUTER IN2, LAN, USB TYPE A or
USB TYPE B port.
4. Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
5. Use the ZOOM ring to adjust the screen
size.
6. Use the FOCUS ring to focus the picture.
CAUTION ►If you wish to have a blank screen while the projector's lamp
is on, use the BLANK function. (see User's Manual - Operating Guide) Taking
any other action may cause the damage on the projector.
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see User's Manual -
Operating Guide.
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON VOLUME+ button
OFF DOWN
VOLUME- button
MY BUTTON
KEYSTONE MUTE
MUTE button
MENU
POSITION
ENTER
ESC RESET
INPUT button
VIDEO button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
COMPUTER button
ASPECT
AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
ASPECT button
OFF DOWN
MY BUTTON
KEYSTONE MUTE
POSITION MENU
ENTER
ESC
RESET
ZOOM ring
FOCUS ring
11