Displaying The Picture - Hitachi CP-RX93 User Manual

Displaying the picture

Activate your signal source. Turn the
1.
signal source on, and make it send the
signal to the projector.
Press the INPUT button on the projector.
2.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to
select an input signal. Press the VIDEO
button for selecting an input signal from
the VIDEO port, or the COMPUTER
button for selecting an input signal from
the COMPUTER IN port.
3. Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
Use the ZOOM ring to adjust the screen
4.
size.
5. Use the FOCUS ring to focus the picture.
CAUTION ►If you wish to have a blank screen while the projector's lamp is
on, use the BLANK function. (see User's Manual - Operating Guide)
Taking any other action may cause the damage on the projector.
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see User's Manual -
Operating Guide.
INPUT button
VIDEO button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
COMPUTER button
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
ASPECT button
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
POSITION MENU
ENTER
ESC RESET
ZOOM ring
FOCUS ring
11