Displaying The Picture - Hitachi MC-WU5506M User Manual

Displaying the picture

1.
Activate your signal source. Turn the signal
source on, and make it send the signal to the
projector.
2.
Use the VOLUME + / - buttons to adjust the
volume.
3.
Press INPUT button on the projector or the
remote control. Select a desirable input referring
to the displayed input list.
4.
Press the ASPECT button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
5.
Use the ZOOM ring to adjust the screen size.
6.
Use the FOCUS ring to focus the picture.
7.
Turn the VERTICAL adjuster fully counter
clockwise. Then turn it clockwise and adjust the
vertical lens position upward.
8.
Turn the HORIZONTAL adjuster clockwise or
counter clockwise to adjust the horizontal lens
position.
CAUTION
while the projector's lamp is on, use the LAN
function. Taking any other action may cause the
damage on the projector.
NOTE • The ASPECT button does not work when
no proper signal is inputted.
• There may be some noise and/or the screen may
icker for a moment when an operation is made. This
is not a malfunction.
• or the details of how to adjust the picture, please
see User's Manual - Operating Guide. (
14
If you wish to have a blank screen
MYBUTTON
INPUT
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON
OFF
PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
OSD MSG RESET
MYBUTTON
INPUT
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON
OFF
PAGE
UP GEOMETRY PICTURE MUTE
ASPECT
INTERACTIVE NETWORK BLANK
DOWN
ESC MENU
ENTER
OSD MSG RESET
VERTICAL adjuster
1)
VOLUME
VOLUME + / -
buttons
INPUT button
INPUT
INPUT button
ASPECT button
ZOOM ring
FOCUS ring
HORIZONTAL adjuster