Displaying The Picture - Hitachi CPWX8 User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to
the projector.
2. Use the VOLUME + / VOLUME - buttons
to adjust the volume.
To have the projector silent, press the MUTE
button on the remote control.
3. Press the INPUT button on the projector.
Each time you press the button, the
projector switches its input port in turn.
You can also use the remote control to select
an input signal. Press the VIDEO button for
selecting an input signal from the HDMI,
S-VIDEO or VIDEO port, or the COMPUTER
button for selecting an input signal from the
COMPUTER IN port.
4. Press the ASPECT button on the remote
control. Each time you press the button,
the projector switches the mode for aspect
ratio in turn.
5. Use the zoom ring to adjust the screen
size.
6. Use the focus ring to focus the picture.
CAUTION ►If you wish to have a blank screen while the projector's lamp
is on, use the BLANK function. (See the "Operating Guide" in the CD.) Any
other method of blocking the projection light, such as attaching something to
the lens or placing something in front of the lens, may cause the damage to the
projector.
NOTE • The ASPECT button does not work when no proper signal is inputted.
• For the details of how to adjust the picture, please see the "Operating Guide"
in the CD.
10
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
VOLUME+ button
ON
DOWN
VOLUME- button
OFF
KEYSTONE
MY BUTTON MUTE
1 2 MUTE button
POSITION MENU
ENTER
ESC RESET
INPUT button
VIDEO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
COMPUTER button
ASPECT AUTO SEARCH
BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN ASPECT button
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
ENTER
ESC RESET
Zoom ring
Focus ring