Tether Strap - Use - Phil & Teds Alpha PT CS 01 Instruction Manual

Tether Strap - Use

Tether passes inside handle and canopy
Pull to increase tension, press adjuster button
to loosen.
ALWAYS ATTACH THE HOOK AND REMOVE
THE WEBBING SLACK.
35
The Tether Strap is an essential part of the
safety system of the child restraint. It must
always be used.
The Tether Strap is permanently attached
to the base. Do not remove it.
The Tether Strap forms a large loop that
goes around the back of the shell and is
held in position by the blue locating guide.
At the other end of the loop is an adjuster
and a snap hook that is attached to the
tether anchorage point.
TO INSTALL
Attach the snap hook to the tether
anchorage in the vehicle. If there is not a
tether anchorage point already installed
see the next pages for installation
instructions or contact a registered Child
Restraint Fitter to have one installed.