Installation In The Vehicle; Tightening The Harness; Installation Of Group I With Isofix & Top Tether For Children Who Weigh 9 - 18Kg - Phil & Teds columbus User Manual

Group i+ii+iii (9 – 36kg)
Table of Contents

Advertisement

4.0 Installation in the vehicle

4.1 Tightening the harness

Please do not leave your child unattended in
the child safety seat in the vehicle.
For the protection of all vehicle occupants
In the case of an emergency stop or an accident
unsecured persons or objects may cause injury to other
vehicle occupants. Please always check that...
• The backrests of the vehicle seats are locked (i.e.that
a foldable rear seat bench latch is engaged).
• All heavy or sharp-edged objects in the vehicle(e.g.
on the parcel shelf) are secured.
• All persons in the vehicle have their seat belts
fastened.
• The child safety seat is always secured when it is in
the vehicle, even if no child is being transported.
To protect your vehicle:
Some vehicle seat covers of sensitive materials(e.g.
velour, leather, etc.) may develop wear marks when
used. This can be avoided by placing
child seats are
a blanket or towel under the child seat.
4.2 Installation of Group I with ISOFIX
and Top tether for children
who weigh 9-18kg
First please check if there are 2 ISOFIX
anchorages in the perpendicular intersection
of the vehicle seat back and seat cushion,
and the user-ready tether anchorage behind
the vehicle seat.
Tip: The user-ready tether anchorage usually
permanently installed on the inner rear
luggage shelf or on the vehicle floor. Details
you could read your vehicle guidelines or
contact the vehicle manufacturer.
• Press the ISOFIX release button and push the
ISOFIX connectors forward as far as possible. (4a)
4a
Press
Installation in the vehicle
17

Advertisement

Table of Contents
loading

Table of Contents