Travel Systems - Phil & Teds Alpha PT CS 01 Instruction Manual

Travel Systems

This child restraint can be used as a travel
system in conjunction with selected strollers
and the appropriate car seat adaptor.
See philandteds.com or mountainbuggy.
com for details.
TO INSTALL:
Having correctly attached an appropriate
car seat adaptor (sold separately) to your
stroller, test that the child restraint is fully
attached by pulling the child restraint up
and forward; it should not come free from
the car seat adaptor.
TO REMOVE:
Release levers are located on both sides
of the child restraint, immediately above
the connector points (as shown). Lift up on
both levers then lift the infant car seat off
the stroller using the carry handle.
41
Mountain Buggy Strollers
protect
™