Seat Cover Removal And Refitting - Phil & Teds Alpha PT CS 01 Instruction Manual

Seat Cover Removal and Refitting

TO REMOVE
1. Remove the shoulder straps by releasing
them from the splitter plate at the back of
the restraint and pulling them through from
the back to the front of the seat.
See page 14 -16
2. Next pull the harness buckle through the
cover. Do not remove the crotch strap from
the shell.
3. Peel the cover back from the front and
release the locking tabs in front of the
handle.
To clean see the advice on page 43
TO REFIT
Always replace the locking tabs securely.
Pass the shoulder straps through the
cover and connect securely using splitter
plate. See page 14-16
22