Phil & Teds Alpha PT CS 01 Instruction Manual page 40

Installation - Tether Anchorage
ANCHOR FITTING ORIENTATION
The anchor fitting must be aligned as shown
unless stated otherwise in the vehicle
owner's handbook.
39
WARNING: CHILD RESTRAINTS MUST
NOT BE ATTACHED TO UNSOUND
METAL OR TO WOOD, OR SYNTHETIC
STRUCTURES. WHEN DRILLING THE
9 MM HOLE DO NOT DRILL THROUGH
FUEL LINES, FUEL TANKS, ELECTRICAL
WIRING, OR RADIO SPEAKERS.
WEBBING STRAPS MUST BE
PROTECTED FROM SHARP CORNERS
AND EDGES.
THE ANCHOR FITTING MUST BE USED
ONLY AS DESCRIBED ABOVE. IT MUST
NOT BE HOOKED ONTO ANY OTHER
OBJECT.
If drilling a new hole, select a position on
the centre line of the seating position, and
no closer than 100 mm from the front edge
of the parcel shelf.