Installation - Base - Phil & Teds Alpha PT CS 01 Instruction Manual

Installation - Base

Place the base onto the vehicle seat.
Push the base to the back of vehicle seat
with the anti-rebound bar against the back
of the vehicle seat.
CORRECT RECLINE
The base must be at the correct level so
Recline Angle Label
that when the child restraint is installed
your baby is reclining back at the optimum
angle.
Too upright and baby's head may fall for-
ward causing breathing difficulties.
The red line on the label on the side of the
base must be horizontal, i.e. level to the
ground.
if the base recline is not correct add a
Rolled Towel
rolled towel or similar firm packing to set
the correct angle.
29