Making The Connections; Connecting Power - Akai KS390 Instruction Manual

MAKING THE CONNECTIONS

CONNECTING POWER

Plug the supplied power adaptor small end into the DC jack
located on the rear panel, plug the adaptor into the standard
AC wall socket.
CAUTION: The unit s designed to operate from a mains
supply of AC 100-240V~50/60Hz. If the adaptor does not fit
properly, turn it over and try again. Do not force it.
NOTES: When the unit is not operated by the AC power or
unused for long periods of time. Please remove the power
adaptor from the wall outlet and unplug from the main unit.
DC OPEARATION
1. Lift battery door to reveal battery compartment. Insert six (6) "C" size alkaline batteries (not provided)
as indicated.
2. Replace cover tightly before operating.
3. When not using batteries for a long period of time, remove batteries to prevent leakage in
compartment. Replace all batteries at the same time. Do not mix old batteries with new ones.
IMPORTANT: The power adaptor MUST be disconnected from the unit, if the unit operates on battery
power. When unused for long periods of time and please remove the batteries from the main unit.
CONNECTING TO YOUR TV OR VCR/ DVD PLAYER
Your CDG machine is designed to connect to your TV the same way you would connect most video
cameras, VCR/ DVD players or video games consoles.
We have provided RCA cables to connect your unit to a TV, VCR/ DVD player, video device or an external
audio/ sound system. The RCA cables have three connection at each end (white and red are for left and
right audio connections and the yellow is for video connections).
Please follow the steps below to display CD+G lyrics on the TV screen:
1. Locate the multi-colored RCA cables
2. Connect video cable (yellow) to the Video Out of the back of the CDG Machine
3. Connect the other end of the video cable (yellow) to the video input on your TV or VCR/ DVD player.
6