[Edge Blending] - Panasonic PT-RQ13K Operating Instructions Manual

Blanking correction
Top of the screen
Bottom of the
screen
Left side of the
screen
Right side of the
screen
*1 The actual blanking width cannot be adjusted exceeding the center of the projected image.
Note
f The [CUSTOM MASKING] setting in [BLANKING] is disabled in the following cases, and the masking function of Panasonic computer
application cannot be used.
g When [QUAD PIXEL DRIVE] is set to [OFF]
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] or [AUTO(x4-speed)] and displaying an
image in simultaneous format

[EDGE BLENDING]

The overlapping area is made seamless by creating inclination in the brightness in the overlapped area when
structuring a multi-display screen by combining the projected images from multiple projectors.
1) Press as to select [EDGE BLENDING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[USER]
f When anything other than [OFF] is selected, proceed to Step 3).
3) Press the <ENTER> button.
f The [EDGE BLENDING] screen is displayed.
4) Press as to specify the location to be corrected.
f When joining at top: Set [UPPER] to [ON]
f When joining at bottom: Set [LOWER] to [ON]
f When joining at left: Set [LEFT] to [ON]
f When joining at right: Set [RIGHT] to [ON]
5) Press qw to switch to [ON].
6) Press as to select [START] or [WIDTH].
7) Press qw to adjust the starting position or correction width.
Chapter 4 Settings — [ADVANCED MENU] menu
Item Operation
Press q.
[UPPER]
Press w.
Press w.
[LOWER]
Press q.
Press w.
[LEFT]
Press q.
Press q.
[RIGHT]
Press w.
Sets the edge blending function to off.
Use the setting value preset in the projector for the inclination of the edge blending area.
Use the user-setting value for the inclination of the edge blending area. (Configuration/registration
requires separate software. Consult your dealer.)
Adjustment
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
Range of adjustment
Top to bottom 0 - 1 199
*1
Left to right 0 - 1 919
*1
ENGLISH - 95