[Sdi In] - Panasonic PT-RQ13K Operating Instructions Manual

f [SIMUL INPUT SETTING] cannot be set when the [POSITION] menu → [GEOMETRY] is set to anything other than [OFF]. To input and
project the video signal in simultaneous format, use an flat screen so that the geometric adjustment is unnecessary, and install the projector
so that the projected image will be rectangular.
f [SIMUL INPUT SETTING] cannot be set when the [ADVANCED MENU] menu → [BLANKING] → [CUSTOM MASKING] is set to anything
other than [OFF] ([PC-1], [PC-2], [PC-3]).
[CUSTOM MASKING] is using the masking function of the Panasonic computer application.
f [SIMUL INPUT SETTING] cannot be set when the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF]
and displaying the four-screen display.
f This may not function properly for some connected external devices.
f This may not function properly depending on the signal.
r [SIMUL INPUT SETTING] screen
Usage of each input signal is displayed under the setting items of [SDI IN] and [SLOT IN] in the [SIMUL INPUT
SETTING] screen when [AUTO(x2-speed)] or [AUTO(x4-speed)] is set.
[SIMUL INPUT SETTING]
[AUTO(x2-speed)]
[AUTO(x4-speed)]

[SDI IN]

Set this item in accordance with the signal input to the <SDI IN 1>/<SDI IN 2>/<SDI IN 3>/<SDI IN 4> terminal.
Setting [SDI LINK] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SDI LINK].
4) Press the <ENTER> button.
f The [SDI LINK] screen is displayed.
5) Press as to select the setting.
[AUTO]
[SINGLE]
[DUAL/SINGLE]
[SINGLE/DUAL]
[DUAL/DUAL]
[QUAD]
6) Press the <ENTER> button.
Note
f The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals.
The quad link is a setting to display one image with four input signals.
f [SDI LINK] is fixed to [SINGLE] in the following cases.
g When [SIMUL INPUT SETTING] is set to anything other than [OFF]
106 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Usage of the input signal
[1st FRAME INPUT]
[2nd FRAME INPUT]
[1st FRAME INPUT]
[2nd FRAME INPUT]
[3rd FRAME INPUT]
[4th FRAME INPUT]
Automatically selects the single link, the dual link, or the quad link.
The single link, dual link, or quad link is automatically distinguished by reading the payload ID
attached to each input signal. Single link will be selected when a payload ID is not added to the input
signal.
Sets each of the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input to single link.
Sets the SDI1 input and the SDI2 input to dual link, and the SDI3 input and the SDI4 input to single
link.
Sets the SDI1 input and the SDI2 input to single link, and the SDI3 input and the SDI4 input to dual
link.
Sets the SDI1 input and the SDI2 input to dual link, and the SDI3 input and the SDI4 input to dual link.
Sets the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input to quad link.
(Factory default setting)
Details
Uses the signal for the corresponding input as the signal for the odd
frame.
Uses the signal for the corresponding input as the signal for the
even frame.
Uses the signal for the corresponding input as the signal for the first
frame (1 + n x 4).
Uses the signal for the corresponding input as the signal for the
second frame (2 + n x 4).
Uses the signal for the corresponding input as the signal for the
third frame (3 + n x 4).
Uses the signal for the corresponding input as the signal for the
fourth frame (4 + n x 4).