Worx WU152PT Instruction Manual page 7

Additional safety rules for your
cordless drill
1
Remove the battery pack from the drill before carrying out
adjustments.
2
Do not expose to rain or water.
3
Do not store the battery pack in temperatures over 40
4
Always charge the battery pack between temperatures 0
Ideal charging temperature is 18
5
Only use the charger and the battery pack provided no others.
6
Avoid short circuit of the battery pack connections (screws & nails).
7 Do not incinerate or burn the battery pack, it may explode.
8 Do not charge a damaged battery pack.
9
Replace any damaged supply cords on your charger.
10
Always disconnect the charger power supply before making or
breaking the connections to the battery pack.
11
Battery pack and charger will be warm during charging this is normal.
12
When not in use, remove a charged battery pack from the charger.
13
Always remove the battery pack from the charger immediately after
re-charging is completed.
14
Your drill and battery pack will be warm when working, this is normal.
15
Do not dispose of batteries in fire, or with household waste. Return
exhausted batteries to your local collection or recycling point.
16
Always check walls, floors and ceilings for hidden power cables and
pipes.
17
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
18
Wear ear protection with cordless drill. Exposure to noise can cause
hearing loss.
C.
o
C to 30
o
C to 24 C.
o o
19
Accessories and metal parts can become very hot.
20
Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring. Contact
with a 'live' wire will also make exposed metal parts of the tool 'live'
and shock the operator.
Warning: If a small amount of electrolyte should leak from
the battery pack under extremes of temperature or after heavy
use, then wash off immediately from your skin and hands using
clean water. For eye contact, rinse thoroughly with clean water and
C.
o
seek medical treatment immediately.
Warnings for the charger:
1. Before using the tool, read the instruction book carefully.
2. Charger is for indoor use only. Do not expose to rain or water.
3. Do not charge non-rechargeable batteries.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
7