Table of Contents
Advertisement
VOX On Threshold – Defines the audio level at which the input turns ON. At this level, audio is
captured and sent from the device. Default setting is 1500. This setting also allows the VOX mechanism to
be deactivated, having audio ON all the time.
VOX Off Threshold – Defines the audio level at which the input shuts OFF. Default setting is 1200.
Function list:
VOX Off
Threshold
VOX Silence Period – Defines the time between reaching VOX OFF level and the actual audio
turns
off. Default setting is 5000 ms.
Function list:
VOX Silence
Period
ViconNet Configuration
After the camera has been setup with the proper IP address, configuration features from a remote
workstation, server or recorder are available as follows.
•
A network settings screen is used to modify the camera's IP parameters. This allows great flexibility
in network setup.
Note: This setup can be performed from any VN-WS/VN-NVR workstation connected to the camera and to
the Nucleus or from a Kollector Elite.
1.
Verify that the camera is connected to the network, that it is active and that it is configured to use the
same Nucleus.
2.
From the workstation desktop, run the ViconNet application.
3.
After logging in, open the site setup selection window.
4.
Select the IP camera setup.
5.
Open the Network Setup and Site Name setup window. Network Settings window will display.
See Figure below.
6.
Change the required parameters and click OK. (See your IT administrator for specific network
parameters.) Application of the camera will restart.
19
XX181-10-02 Rev 110 VN-856V5 IP Camera
Advertisement
Table of Contents
