Table of Contents
Advertisement
Quick Links
XX181-02-00
VN-855 AND VN-855-C
VN-855DN AND VN-855DN-C
VN-855WDR AND VN-855WDR-C
IP CAMERAS (VICONNET VER 3)
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not
be used for this purpose.
Warning: To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
Copyright © 2007 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
ViconNet, Kollector and their logos are registered trademarks of Vicon Industries Inc.
I-Onyx and its logo is a trademark of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NY 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288)
TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44 (0) 1489-566300
WEB: www.vicon-cctv.com
Vicon part number 8009-8181-02-00
Rev 1107
Section 1/3
Advertisement
Table of Contents
Related Manuals for i-onyx VN-855
Summary of Contents for i-onyx VN-855
- Page 1 Vicon and its logo are registered trademarks of Vicon Industries Inc. ViconNet, Kollector and their logos are registered trademarks of Vicon Industries Inc. I-Onyx and its logo is a trademark of Vicon Industries Inc. VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NY 11788...
- Page 3 FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.
-
Page 5: Table Of Contents
OSD Menu for VN-855WDR..........................8 ViconNet Configuration..........................15 Shipping Instructions............................ 24 Coaxial Cable Recommendations........................ 25 Twisted-Pair Cable ............................26 Network Cable..............................27 Technical Information ........................... 29 Vicon Standard Equipment Warranty......................30 XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 7: Important Safeguards
Contact an electrician to replace an obsolete outlet. Do not force a plug into a non-grounded outlet. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 8: Precautions
4. Power connector – 1 pc 5. 6-pin alarm/mic connector – 1 pc The I-Onyx™ VN-855 is an integrated camera that captures digital video as well as converts analog video ® to digital video and transmits the video over the ViconNet network (using Version 3 software). -
Page 9: Connectors And Controls
CONNECTORS AND CONTROLS [High-Resolution Model VN-855] [Day/Night Model VN-855DN] [WDR Model VN-855WDR] XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... - Page 10 ALC (automatic light control)/AI (autoiris lens) mode. Pole 4 is set to ON for EE/ELC and OFF for AI/ALC. In the EE/ELC mode, a continuously variable electronic shutter is employed to automatically control the exposure time of the CCD image sensor according to the incoming light level. With this XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 11 This function can be used with either the linear shutter (EE/ELC mode) or an autoiris lens (AI lens/ALC mode). For the VN-855WDR, the Wide Dynamic Range (WDR) function, which can be turned ON or OFF. provides the best contrast for high quality images, XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 12 This function is enabled when set to ON. For the VN-855DN camera, the day/night function can be turned ON or OFF. 6. AUTOIRIS LENS CONNECTOR FOR DC DRIVE LENS This connector supplies the control signals to the DC drive autoiris lens. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 13 1. Install a lens and connect the camera to a monitor and power supply. If the lens is motorized, it must also be connected to a lens control. 2. Position the camera 25~50 feet (8~16 meters) from a flat vertical surface suitable for focusing. A newspaper works well as a focusing target. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 14 Pan Left/Right to make changes/selections and Tilt Up/Down to move the cursor in the menu system and navigate between menus. When using the mouse to set parameters that have a large range of settings, clicking and holding the mouse will scroll quickly through the numbers. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 15 Caution: In order to change setting values in the menus, first set PRIORITY to REMOTE on SPECIAL menu. The SPECIAL menu must be set to REMOTE before menu items are set for them to take effect. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 16 Use ▲ ▼ ◀ ▶ , AP to select BLC (Backlight Compensation) In general, Iris is adjusted for a bright area, so the face of a person who stands against a bright area appears dark. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 17 AGC mode: Automatic Gain can be setup as High/Low/Off using Pan Left/Right. In a dark environment, when AGC gain is set to high, the image becomes brighter. Flickerless mode: When ON, shutter speed is fixed at 1/100 sec. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 18 LENS MANUAL4 DAY/NIGHT COLOR4 DAY/NIGHT COLOR4 ATW2 ATW1 SPECIAL SPECIAL EXIT QUIT EXIT QUIT Use ▲ ▼ ◀ ▶ , AP to select Use ▲ ▼ ◀ ▶ , AP to select XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 19 Considering the change of color, select proper values and fix color temperature. Caution: Auto White Balance function can work incorrectly in high temperature (bright sky, sunset), darkness, or drastic change of light. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 20 In Posi/Nega mode, brightness of video shows (+: normal, -: reverses to negative image). Sharpness In Sharpness mode, outline of video image can be controlled. At high level, outline is clear; however, when level is too high, noise can occur. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
-
Page 21: Viconnet Configuration
Bandwidth limitations on ports connected to workstations (using 100 or 1000 Mbps). • Workstation capabilities such as processing speed, disk write speed and display card strength. • Storage size and location types including local Workstation recording, attached SCSI RAID and integrated NAS/SAN devices. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... - Page 22 Although the ViconNet software does not limit the number of Groups and Users that can be created, the VN-855IP IP Camera has Users and Groups limitations. For ViconNet version 3, the camera can support the first 20 Groups (including Administrators and Guests) and the first 100 Users. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
-
Page 23: Important Note
IMPORTANT NOTE! XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... - Page 24 The Log files field allows the user the ability to put a copy of log files in a predefined directory. Password management selects a directory to save all password files. (By default, the setup files will be installed to C:\VUG.) Setup XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 25 4. Press the Select button on the lower section of the screen. 5. The selected unit appears on the Selected unit section on the top of the screen and settings can be changed. Select XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 26 Note: The Apply button must be pressed for changes to take effect. Note: Verify all IP addressing parameters with your IT administrator. Unit Install TAB The Install TAB allows the user to install/upgrade newer versions. Install XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 27 Loading of application is disabled. The Disable load button allows the pausing of the application load in case of software issues while still permitting communication via VNSetup; the Enable load button resumes the application load. Advanced XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 28 An Authorization screen is used to establish authority levels, by user group. Functions such as PTZ and video view, record and playback can be set for authority level. • A priority screen is used to establish video quality and FPS levels. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
- Page 29 2. An alarm can be triggered upon video motion detection and video loss. This alarm can be sent remotely to other networked units. Refer to the ViconNet workstation manual XX113-3X for complete information on operation. A copy of the manual can be found on the CD included. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
-
Page 30: Shipping Instructions
Unit’s original date of purchase, if still under warranty 3. Pack the unit carefully. Use the original shipping carton or its equivalent for maximum protection. 4. Mark the R.A. number on the outside of the carton on the shipping label. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 31: Coaxial Cable Recommendations
2400 (750) Clean picture 820 (250) 1000 (300) 1600 (500) Best picture 400 (120) 530 (160) 820 (250) ** For longer cable runs, use a Vicon Video Amplifier to obtain a suitable picture. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 32: Twisted-Pair Cable
Belden 8162 Datalene¹ 15000 (4600) Belden 9729 Datalene¹ 15000 (4600) Belden 9182 Datalene¹ 25000 (7600) ¹ Datalene is a Registered Trademark of Belden. Belden Inc. http://www.belden.com/(800) 235-3361 Table Recommended Individually-Shielded, Twisted-Pair Cable Types XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 33: Network Cable
*For any cable in the system exceeding 300 ft (75 m), it is recommended to use Cat5e or higher to maintain good signal integrity. Belden Inc. http://www.belden.com/ (800) 235-3361 Table Recommended Network Cable Types XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... -
Page 34: Technical Information
- 24 hours normal activity with 50% detected movement over time, Normal compression and Quality Q5 (320 x 240 pixels NTSC, 384 x 288 pixels PAL) - Recording durations may vary based on actual scene activity. XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... - Page 35 *Used in Japan only Wire Size (AWG) Maximum Distance Annealed ft (m) Copper Wire 534 (163) 853 (260) 1358 (414) 2153 (656) 3429 (1045) Typical Rear Panel Table 1: Maximum Power Cable Distances XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera...
-
Page 36: Vicon Standard Equipment Warranty
WARRANTY SHALL BE OF NO EFFECT IF AT THE TIME OF SALE A DIFFERENT WARRANTY IS POSTED ON THE COMPANY’S WEBSITE, WWW.VICON-CCTV.COM. IN THAT EVENT, THE TERMS OF THE POSTED WARRANTY SHALL APPLY EXCLUSIVELY. Vicon Part Number: 8006-9010-03-03 Rev 807 XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera... - Page 37 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Germany vin-videotronic infosystems gmbh Lahnstrasse 1 D-24539 Neumuenster Phone: +49 (0) 4321 8790...