Table of Contents
Advertisement
ViconNet Configuration
After the camera has been setup with the proper IP address, configuration features from a remote
workstation, server or recorder are available as follows.
•
A network settings screen is used to modify the camera's IP parameters. This allows great flexibility
in network setup.
Note: This setup can be performed from any VN1000V3/VN-NVR workstation connected to the camera and
to the Nucleus or from a Kollector Elite.
1.
Verify that the camera is connected to the network, that it is active and that it is configured to use the
same Nucleus.
2.
From the workstation desktop, run the ViconNet application.
3.
After logging in, open the site setup selection window.
4.
Select the IP camera setup.
5.
Open the Network Setup and Site Name setup window. Network Settings window will display.
See Figure below.
6.
Change the required parameters and click OK. (See your IT administrator for specific network
parameters.) Application of the camera will restart.
•
An Authorization screen is used to establish authority levels, by user group. Functions such as PTZ
and video view, record and playback can be set for authority level.
•
A priority screen is used to establish video quality and FPS levels.
22
Network Settings Window
XX181-02-00 Rev 1107 VN-855 Ver 3 IP Camera
Advertisement
Table of Contents
