Meyer Sound UltraCompact High-Power Curvilinear Array Loudspeaker M'elodie Operating Instructions Manual page 35

A B -10º
A
CAUTION: Do not exceed five M'elodie
cabinets high to avoid tipping over the stack.
CAUTION:
Avoid moving the M'elodie
stack in the front-to-back direction of the
loudspeakers (the long side); always move the stack
sideways to avoid tipping it over.
Figure 7.13. The M'elodie stack should only be moved sideways when being
transported on the MCF-M'elodie caster frame
The M'elodie GuideALinks allow multiple transport angles
with the MCF-M'elodie caster frame.
■ Use the 5 position on the M'elodie rear GuideALink to
get the first M'elodie with respect to the caster frame at
0 degrees. This setting is preferred when all M'elodies
are at 0 degrees.
■ Use the 0 position to downtilt the first M'elodie with
respect to the caster frame, to compensate if the rest of
the M'elodies in the stack have severe angles.
B A
11
9
6
3
0
11
9
6
3
0
11
9
6
3
0
11
9
6
3
0
11
9
6
3
0
B
Use position 5
11
9
6
3
0
First M'elodie at 0 degrees (straight-up) with respect to the
Figure 7.14.
MCF-M'elodie
Use position 0
First M'elodie at -5 degrees (downtilted) with respect to the
Figure 7.15.
MCF-M'elodie
TIP:
The MG-M'elodie can travel installed on
top of a M'elodie stack.
CHAPTER 7
29