Appendix B: Optional Veam Multipin Connector - Meyer Sound UltraCompact High-Power Curvilinear Array Loudspeaker M'elodie Operating Instructions Manual

APPENDIX B

APPENDIX B: OPTIONAL VEAM MULTIPIN CONNECTOR

The M'elodie loudspeaker requires a grounded outlet. It
is very important that the system be properly grounded in
order to operate safely and properly. Figure B.1 illustrates
correct wiring for the creation of power cables and
distribution systems for M'elodie loudspeakers shipped
from the factory with the VEAM multipin connector.
Figure B.1. VEAM multipin connector power pin-out
Figure B.2. VIM-4 module, front (top) and rear (bottom)
32
line (brown)
ground (green/yellow)
neutral (blue)
For complete wiring conventions and pin-outs for AC,
audio, and RMS connections please refer to the Meyer
Sound document VEAM Cable Wiring Reference (PN
06.033.113).
In addition, Meyer Sound offers the VIM-4 (VEAM interface
module) with four VEAM connectors in the front and a
single-phase IEC 309 32-amp connector in the rear to
distribute power, audio, and RMS to M'elodie loudspeaker
systems fitted with VEAM connectors.