Bowers & Wilkins T7 User Manual page 3

1. T7 Carton Contents
• T7 speaker.
• T7 power supply.
• Regional plugs adapters.
• Literature pack
Environmental Information
This product complies with international directives,
including but not limited to the Restriction of
Hazardous Substances (RoHS) in electrical and
electronic equipment, the Registration, Evaluation,
Authorisation and restriction of Chemicals (REACH)
and the disposal of Waste Electrical and Electronic
Equipment (WEEE). Consult your local waste
disposal authority for guidance on how properly to
recycle or dispose of this product.
Note: T7 is not waterproof and is not intended
for use in high humidity environments such as
bathrooms, swimming pools and saunas.
2. Getting to know T7
T7 is a Hi-Fi speaker built with maxiumum portability
in mind. Once switched on via the Power button
on its right hand side, it is controlled via Bluetooth,
Play/Pause, Volume + and Volume – buttons on its
top panel. A blue indicator adjacent to the Bluetooth
button displays Bluetooth connection state and a
column of white indicators above the Power button
displays battery charge level. T7 also provides
audible feedback for some control commands and
events.
Connections on the back of T7 include a power
supply input, auxiliary input (3.5mm stereo jack), and
service port used for firmware updates only (micro-
USB). A pin-hole Reboot button is also located on
the back of T7.
Bluetooth pairing Play/Pause
On / Off / Check Battery Power
Diagram 1
Buttons and connection sockets.
Volume down Volume up
Auxiliary Service Reboot
(Firmware
update only)
3