TYAN S7065 User Manual page 30

CLEAR BUTTON : Clear CMOS set
Normal(Default)
Clear CMOS
RST BUTTON : Reset system set
Normal (Default)
Reset system
You can reset the CMOS settings by using this button if
you have forgotten your system/setup password or
need to clear system BIOS setting.
- 1.Power off system and disconnect power
connectors from the motherboard
2.Press the button (Clear CMOS)
-
- 3.Reconnect power & power on system
NOTE:
After flashing new BIOS please follow the
steps:
a. Clear CMOS
b. Enter BIOS setup menu and load Default
Settings. Then do a Save and Exit from setup.
Press the button to reset the system.
30
http://www.TYAN.com