Getting Started - Panasonic P51 User Manual

1.2

Getting started

1.2.1 Set-up
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your
phone before inserting or removing the SIM card.
Your phone only support Micro-SIM card. Please contact network
operator and use professional scissors prune SIM card to Micro-SIM card.
To install, take off Micro-SIM card protector, insert the Micro-SIM card
into the slot with chip facing downward, and then cover the slot. To
remove the card, open Micro-SIM card protector, gently press it out, and
then cover the slot.
Before inserting/removing the SIM card, you should ensure the phone is
off, to protect it from corruption or damage.
On dual SIM model, SIM1 support 2G and 3G networks, SIM2
only support 2G networks.
Installing or removing the microSD card
15
To install, please open microSD card slot first, and then place the external
microSD card into the slot with the gold contact facing down. To remove
the external microSD card, please open microSD card lock and take it out
from the slot.
Before inserting/removing the microSD card, you should ensure the
phone is off, to protect it from corruption or damage.
Charging the battery
Connect the battery charger to your phone and mains socket respectively,
then the charging status bar will float.
• Make sure the battery is correctly inserted before connecting the
charger.
• When using your telephone for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery (
indicated by the percentage on screen while the phone is powered off. The
percentage increases as the phone is charged.
The charging status bar will not float if your battery is extendly
consumed. To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when not
in use; reduce the backlight time, etc.
). Charging status is
16