Table of Contents
Advertisement
Using the
2
Use this key when no one will be staying on the premises.
AWAY Key
When armed in AWAY mode, the system will sound an alarm if a protected door or window is
opened, or if any movement is detected inside the premises. You may leave through the
entrance door during the exit delay period without causing an alarm. You may also re-enter
NOTE:
through the entrance door, but must disarm the system within the entry delay period or an alarm
Failure to close an
open exit route zone
will occur.
before the exit delay
Close all protected perimeter windows and non-main exit doors before arming (see
time ends may result in
CHECKING FOR OPEN ZONES section).
that zone being auto-
matically bypassed at
that time
1.
2.
ARMING ALL PROTECTION
(With Entry Delay ON)
AWAY
+
2
(Security Code)
ARME D
AWAY
YOU MAY E XIT NOW
ENTER SECURITY CODE THEN PRESS AWAY
Example: 7
2
9
LISTEN
The keypad will beep twice, or beep continuously if exit
warning has been programmed for your system, and
displays the armed AWAY message. The red ARMED
indicator also lights.
The "You May Exit Now" portion of the message disappears
when the exit delay expires.
– 15 –
6
then press the AWAY key.
Advertisement
Table of Contents
