Interval Timer Photography - Nikon D5200 User Manual

Interval Timer Photography

The camera is equipped to take photographs automatically at preset intervals.
D
Before Shooting
Before beginning interval timer photography, take a test shot at current settings and view
the results in the monitor. To ensure that shooting starts at the desired time, select Time
zone and date in the setup menu and check that the camera clock is set correctly (0 66).
Use of a tripod is recommended. Mount the camera on a tripod before shooting begins. To
ensure that shooting is not interrupted, be sure the battery is fully charged or use an
optional EH-5b AC adapter and EP-5A power connector.
1
Select Interval timer shooting.
Press the G button to display the menus.
z Highlight Interval timer shooting in the
shooting menu and press 2.
2
Choose a starting time.
Choose from the following starting triggers.
To start shooting immediately, highlight Now
and press 2. Shooting begins about three
seconds after settings are completed;
proceed to Step 3.
To choose a starting time, highlight Start time
and press 2 to display the start time
options shown at right. Press 4 or 2 to
highlight hours or minutes and press 1 or
3 to change. Press 2 to continue.
3
Choose the interval.
Press 4 or 2 to highlight hours, minutes, or
seconds and press 1 or 3 to choose an
interval longer than the slowest anticipated
shutter speed. Press 2 to continue.
40
G button