Image Size
Choose a size for JPEG images (this option is not available for RAW-quality images;
0 34).
Image size
# Large
$ Medium
% Small
Approximate size when printed at 300 dpi. Print size in inches equals image size in pixels
divided by printer resolution in dots per inch (dpi; 1 inch=approximately 2.54 cm).
1
Place the cursor in the information display.
If shooting information is not displayed in
the monitor, press the P button. Press the
P button again to place the cursor in the
information display.
2
Display image size options.
Highlight the current image size in the
information display and press J.
3
Choose an image size.
Highlight an option and press J. To return to
shooting mode, press the shutter-release button
halfway.
A
File Names
Photographs are stored as image files with names of the form "DSC_nnnn.xxx, " where nnnn
is a four-digit number between 0001 and 9999 assigned automatically in ascending order by
the camera, and xxx is one of the following three-letter extensions: "NEF" for NEF images,
"JPG" for JPEG images, or "MOV" for movies. The NEF and JPEG files recorded at a setting of
NEF (RAW)+JPEG have the same file names but different extensions.
A
The Fn Button
Image quality and size can also be adjusted by rotating the command dial while keeping the
Fn button pressed. See Custom Setting f1 (Assign Fn button, 0 66).
Size (pixels)
6000 × 4000
4496 × 3000
2992 × 2000
P button
*
Print size (cm/in.)
50.8 × 33.9/20 × 13.3
38.1 × 25.4/15.0 × 10
25.3 × 16.9/10 × 6.7
Information display
z
35
Need help?
Do you have a question about the D5200 and is the answer not in the manual?