Cleaning The Air Filters And Vents - Epson PowerLite 7850p User Manual

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If
they are not cleaned periodically, they can become clogged with dust,
preventing proper ventilation. This can cause overheating and damage
the projector.
Follow these steps:
1. Turn off the projector and unplug the power cord.
2. To clean the intake vents, EPSON recommends using a small
vacuum cleaner designed for computers and other office
equipment. If you don't have one, gently clean the vents with a
soft brush (such as an artist's paintbrush).
3. Gently turn the projector over and remove the filters from the
side and bottom of the projector. Then use a small vacuum
cleaner or soft brush to clean the filters. Slide the filters back into
place when you're done.
note
To order replacement air
filters without the lamp,
request part number
V13H134A01. See page 14
for ordering information.
Maintaining the Projector
165