Epson PowerLite 7850p User Manual page 183

An image displayed with EasyMP appears distorted.
Because of their resolution, some JPEG images cannot be displayed
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
In EMP SlideMaker, PowerPoint files don't appear in the
file window.
EMP SlideMaker does not support PowerPoint 95. Files created
in this version of PowerPoint must be opened and resaved in
PowerPoint 97 or later.
In EMP SlideMaker, your PowerPoint files don't display
thumbnails and can't be pasted into scenarios.
If you use PowerPoint 97, make sure the MS Office JPEG converter
has been installed. Run the Office 97 installer, display the
Converts
option, and install the JPEG filter. Also, make sure
and Filters
PowerPoint is installed on the computer you're using to build the
scenario.
You can't edit scenario files in EMP SlideMaker after they
have been transferred to the memory card.
When scenario files are transferred, they are converted to the .SIT
format. You can only edit scenarios before they are transferred (in the
.SIC format). Open the scenario files saved on your hard drive, make
any desired changes, then transfer the scenario again to your memory
card.
You can't transfer your slideshow to the memory card
because you aren't able to see the card's drive letter.
You must insert the memory card in your computer's PCMCIA slot
before you select from the Scenario Option(s) menu.
Send Scenario
If you don't, you won't be able to see the card's drive in the drive
selection window. If this happens, close and restart EMP SlideMaker.
Make sure your card is inserted before you select .
Send Scenario
Solving Problems
183