Time Left Display; To Display The Core Temperature; Residual Heat Use - Miele H6800BM Operating And Installation Instructions

Time left display

After a certain time, the estimated
duration of the cooking process
remaining (time left) will appear in the
display.
The time remaining is calculated from
the cooking temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.
The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.
Altering the cooking or core
temperature or selecting a different
function will delete the time left
information.
The time remaining will be recalculated
if the door is kept open for a long
period of time.

To display the core temperature

As soon as the time remaining appears,
you can also display the actual core
temperature.
^ Select "Change".
^ Touch "Display core temperature"
^ Touch On.
^ Touch "OK".
The actual core temperature will also
appear in the display.

Residual heat use

The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
energy save mode. The measured core
temperature is no longer visible.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting has
been chosen.
When the core temperature selected
has been reached,
– "Process finished" will appear in the
display,
– a buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones"),
If the food is not yet cooked
sufficiently, insert the food probe into
another place and repeat the
programme.
Roasting
99