Scale Settling Filter Configuration - Metrologic Stratos MS2xxx Series Configuration Addendum

S /L
CALE OAD
Single or Dual Cable Scale Configuration Bar Codes

Scale Settling Filter Configuration

The following bar codes can be used to configure a Single or
Dual Cable MS2xx0.
The MS2xx0 must be in scale program mode to use these bar codes.
The scale's filter setting allows the unit to withstand a certain amount of vibration
from the checkout counter. A stronger filter allows for more vibration to be
absorbed but the weight may take a little longer to settle. Scales are normally
shipped with a loose filter.
* Scale = Loose Filter
³ 9 9
7
C C
ELL ONFIGURATION
6 0 0 5
B C
AR
Loose filter setting for low vibration
environments.
* Factory Default Setting
ODES