Metrologic Stratos MS2xxx Series Configuration Addendum page 22

S /L
CALE OAD
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Data Bits & Parity)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 11 or 13 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = 8 Data Bits, No Parity
³ 9 9
Scale = Odd Parity
³ 9 9
17
C C
ELL ONFIGURATION
6 0 2 3
6 0 2 4
B C
AR
Set the scale communication parameters to
8 data bit, no parity.
Set the scale communication to odd parity.
ODES