3"dynabuffer 12,000 rpm, for serial no. 13f2196a and higher (9 pages)
Summary of Contents for Dynabrade Autobrade Red 18180
Page 1
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools WARNING (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s Warning/Safety Operating Instructions for more complete safety information.
2. Some silencers on air tools may clog with use. Clean and replace as required. 3. All Dynabrade rotary vane style air motors should be lubricated. Dynabrade recommends one drop of air lube per minute for each 10 SCFM (example: if the tool specifications state 40 SCFM, set the drip rate of your filter-lubricator at 4 drops per minute).
Need help?
Do you have a question about the Autobrade Red 18180 and is the answer not in the manual?
Questions and answers