Page 1
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools WARNING (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s Warning/Safety Operating Instructions for more complete safety information.
2. Some silencers on air tools may clog with use. Clean and replace as required. 3. All Dynabrade Rotary Vane air motors should be lubricated. Dynabrade recommends one drop of air lube per minute for each 10 SCFM (example: if the tool specifications state 40 SCFM, set the drip rate of your filter-lubricator at 4 drops per minute).
Page 3
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade Motor Disassembly/Assembly Instructions Important: Manufacturers warranty is void if tool is disassembled before warranty expires. A complete Tune-Up Kit, part number 96122, is available which includes assorted parts to help maintain and repair motor. These instructions are for use in conjunction with Part Number 57325 Repair Kit, which includes special tools for proper disassembly/assembly of tool.
Need help?
Do you have a question about the 10600 and is the answer not in the manual?
Questions and answers