Connector Locations; General Remarks About Wiring - Vidicode APRESA Installation Manual

Connector locations

Connector locations
Connector Connector locations locations
5.2.
The connectors involved with the telecom signals can all be found on the back side as shown
below:
0
1
The VoIP and TETRA connections are of CAT5 / CAT6 Ethernet type. Thanks to the world wide
standardization, no serious wiring issues are expected. The focus with these networks is on the
configuration of the network elements like switches and routers.
All other (old school) telecom infrastructure is interfaced via (optional) specialized interface cards.
Depending on the existing wiring of telephone installation that must be tapped you can follow
different paths to do the job right. The focus here is tracing the wires that carry the desired signal
and how to make an easy TAP to feed the signal to the APRESA.
In the next sections you find the general remarks
G G G G eneral remarks eneral remarks about
eneral remarks eneral remarks
5.3.
APRESA channels that use interface cards never deals with any line termination.
APRESA is generally installed to tap
of wiring systems, modern and old.
APRESA monitors the communication line to be recorded electrically "in parallel". As a result we
will have to make "T" junctions. For the RJ modular connection system one can use readily on the
market available "T" splitters (RJ12 or RJ45)
CONNECT VoIP AND
T ET RA VIA T HIS
ET HERNET PORT
about wiring wiring
about about wiring wiring
existing existing
existing existing telecom networks where we have to deal with all kind
APRESA INSTALLATION MANUAL VIDICODE ©2012
CONNECT AUDIO / ANALOG / T DM /
ISDN2 AND ISDN E1/T 1 VIA
SPECIALIZED INT ERFACE CARDS
DWG1135_00
36