Wiring Using The Rj11 Patch Box - Vidicode APRESA Installation Manual

5.4.3. 5.4.3.
5.4.3. 5.4.3.
To ease the wiring job, all analog interface boards are supplied with a RJ11 patch box and a
RJ21/RJ21 cable 1meter in length. (Optionally lengths of 3,5 and 10m are available)
Connect the Patch Box to the APRESA:
0
1
AT P (A NAL OG)
INT ERFACE CARD
The RJ11 Patch Box supports 24 channels. Each channel on the Patch Box has its own RJ11 inlet
connector. Note that the RJ11 modular connector has 6 pin positions of which only 4 are in fact
have contacts. RJ11 is also referred as a 6P4C modular connector.

Wiring using the RJ11 Patch Box

Wiring using the RJ11 Patch Box
Wiring Wiring using the RJ11 Patch Box using the RJ11 Patch Box
BACK SIDE A PRESA
2 4 CH RJ1 1 to RJ2 1 PAT CH
2 4
TO AUDIO
SOURCE
APRESA INSTALLATION MANUAL VIDICODE ©2012
RJ2 1 -RJ2 1
CA BL E
BO X
2 4 x
4-WIRE CABLE
APPLY
SIGNAL TO
THE INNER
CONDUCTORS
2 4 x
TO AUDIO
SOURCE
6 PIN
POSITIONS/4
PINS
INSERTED
1
4 3 2 1
DWG1 1 3 7 -0 0
39