Disassembly And Assembly For Repair; Remove The Battery; Disassemble Main Unit (Aluminum Chassis And Pcb) - HYT TC-500 Service Manual

Disassembly and Assembly for Repair

Remove the Battery

1. Turn the radio off.
2. Slide the battery latches upwards in the direction of arrow ①.
3. Pull the top part of the battery away from the radio' s body and lift the battery from the radio in the
direction of arrow ②. (As shown in figure 1)

Disassemble main unit (aluminum chassis and PCB)

1. Remove the two screws at the base of the chassis.
2. Pull the Channel Selector Knob and the Volume Control Knob off.
3. Remove the antenna at top of the radio.
4. Remove the screws of the microphone jack cover and pull the jack cover off. (As shown in figure 2)
Screw
Screw
Figure 1
Jack Cover
Volume
Control Knob
Channel Selector
Knob
Figure 2
63
TC-500 Service Manual