Initialization Of A, D Page Data; Initializing A, D Page Data - Sony DSC-F717 Manual

DSC-F717
COVER COVER
1-2. INITIALIZATION OF A, B, D, E, F, 7, 9 PAGE
DATA
1-2-1.

Initialization of A, D Page Data

1. Initializing A, D Page Data

Note: If the A, D page data has been initialized, the following
adjustments need to be performed again.
1) Modification of A, D page data
2) Video system adjustments
3) LCD system adjustments
4) Color electronic viewfinder system adjustment
Adjsuting page
Adjsuting Address
Adjusting page
Adjusting Address
Initializing Method:
Order Page Address Data
1 0 01
2 4 03
3 4 00
4 4 01
5 4 02
6
2. Modification of A, D Page Data
If the A, D page data has been initialized, change the data of the
"Fixed data-2" address shown in the following table by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camera may not operate.
3) When changing the data, press the PAUSE button of the
adjusting remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of A, D Page Data:
Order Page Address Data
1 2 00
2 2 01
A
00 to FF
D
10 to 7F
Procedure
01
11
2D
2D Press PAUSE button.
Check the data changes to "01".
Perform "Modification of
A, D page Data".
Procedure
29
29 Press PAUSE button.
3. A Page table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the A, D Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of A, D Page Data")
Address Initial value
00 to 4E
4F
50 to 81
82 2D
83 3C
84 63
85 16
86
87 6B
88 90
89 83
8A 0A
8B to 91
92 34
93 44
94
95 7F
96, 97
98 94
99 82
9A 25
9B to 9F
A0 80
A1 to A7
A8
A9
AA to FF
4. D Page table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing the A, D Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of A, D Page Data")
Address Initial value
10 to 20
21 00
22 to 7F
6-8
Remark
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
VCO adj. (NTSC mode) (LCD)
VCO adj. (PAL mode) (LCD)
V-COM adj. (LCD)
D Range adj. (LCD)
Fixed data-1 (Initialized data)
V-COM level adj. (LCD)
White balance adj. (LCD)
Contrast adj. (LCD)
Fixed data-1 (Initialized data)
VCO adj. (NTSC mode) (EVF)
VCO adj. (PAL mode) (EVF)
Fixed data-1 (Initialized data)
Bright adj. (EVF)
Fixed data-1 (Initialized data)
White balance adj. (EVF)
Contrast adj. (EVF)
Fixed data-1 (Initialized data)
Composite video level adj.
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-2
Fixed data-1 (Initialized data)
Remark
Fixed data-1 (Initialized data)
Test mode
Fixed data-1 (Initialized data)